Free Shipping--Secure Payment
Shop / nexillumi led strip lights connectors

nexillumi led strip lights connectors

Solderless Waterproof LED Strip Connector for 10mm Wide RGB Flexible LED Strips

$3.79 $5.39
New

Description

These 4-pin connectors without solder are only suitable for 10mm wide WATERPROOF RGB 5050 LED strips that have 4 copper contacts at the cutting line. The 4 pins in the connectors should fully penetrate the 4 copper contacts on the WATERPROOF LED strip to ensure good electrical conductivity. When cutting the LED strip into 2 LED strips, be very careful along the cutting line to ensure that the area of the copper contacts on the 2 LED strips is the same (not a larger area of copper contacts on one LED strip and a smaller area on the other LED strip). If the area of the copper contacts on the LED strip is too small, the 4 pins in the connectors cannot fully penetrate the 4 copper contacts, resulting in poor electrical conductivity. Consequently, you may only get 2 different colors or even no colors at all.

For installation: 1. Carefully cut the WATERPROOF RGB 5050 LED strip along the cutting line so that the area of the 4 copper contacts on each LED strip is the same. 2. Remove the tape on the backside of the LED strip around the area of the 4 copper contacts to expose the 4 copper contacts. 3. Ensure that the + electrode on the connector matches the + electrode on the LED strip. 4. Adjust the contact points between the 4 pins in the connector and the 4 copper contacts on the LED strip to ensure the 4 pins in the connector can fully penetrate the 4 copper contacts on the LED strip. Then use your finger to press a little hard on the LED strip so that the 4 pins in the connector can go through the 4 copper contacts on the LED strip and then go into the LED strip a little. 5. Close the LED strip in the connector, making sure the 4 pins in the connectors fully penetrate the 4 copper contacts on the LED strip.

The package includes 10 x 4-pin connectors for 10mm wide Waterproof RGB 5050 LED strips. These waterproof-design, easy-clasp, solderless connectors only work for 10mm wide WATERPROOF SMD 5050 RGB LED strips that have 4 copper contacts at the cutting line. They are specially designed according to the structure of WATERPROOF RGB 5050 LED strips and cannot be used for NON-waterproof RGB 5050 LED strips.

No soldering is required. Just clasp your prepared WATERPROOF LED strip section into the connector to connect it. However, when installing, you need to carefully adjust the contact position to ensure the 4 pins in the connectors can fully penetrate the 4 copper contacts on the WATERPROOF LED strip to ensure good electrical conductivity.

These connectors provide a solderless, gapless, and seamless connection for WATERPROOF SMD5050 RGB LED strips. The product is packed in a unique packaging bag printed with the trademark, and there are 10 connectors inside the package.

product information:

AttributeValue
colorWhite (only for Waterproof RGB 5050 LED strip)
brandTronicsPros
indoor_outdoor_usageIndoor
special_featureWaterproof
light_source_typeLED
power_sourceCorded Electric
light_colorRGB
themeIndoor
styleModern
materialPlastic, Metal
controller_typeClasp Control
number_of_light_sources5050
voltage12 Volts
wattage72 watts
included_components10x 4-pin connectors for 10mm wide Waterproof RGB 5050 LED strip
control_methodApp
water_resistance_levelWaterproof
upc737590296130
manufacturer‎TronicsPros
part_number4350590071
item_weight0.634 ounces
package_dimensions‎4.8 x 3.86 x 0.75 inches; 0.63 ounces
item_model_number‎4350590071
is_discontinued_by_manufacturer‎No
finish_typesMatte
special_featuresWaterproof
light_directionAdjustable
batteries_includedNo
batteries_requiredNo
customer_reviews
ratings_count3
stars3.9
best_sellers_rank#53,111 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
#57 in Track Lighting Connectors
date_first_available‎April 19, 2016
Free Shipping Easy Returns Secure Payment